Electromechanic Construction

Brazing alloys for manufacturing of:
Electromechanic constructions, power generators, transformers, electrical motors, heating elements, electrical contacts, disconnecting switches, realis, etc

SOFT SOLDERS
Code Composition % Melting Range SOL — LIQ Standards
Sn Pb Ag Cd Zn °C DIN 1707 EN 29453
Ag1,5SnPb 5 93,5 1,5     296-301    
Cd82Zn16Ag     2 82 16 270-280 Cd82Zn16Ag2  
FLUXES
FLUX SN6 Liquid
SILVER BASED ALLOYS
Code Composition % Standards Notes
Ag Cu Zn Sn Cd Ni Other DIN 8513 EN 1044 Alloys without Cadmium
Ag20 20 44 36       Si L-Ag20 AG 206
Ag34Sn 34 36 27,5 2,5       L-Ag34Sn AG 106
Ag40Sn 40 30 28 2       L-Ag40Sn AG 105
Ag44 44 30 26         L-Ag44 AG 203
Ag45Sn 45 27 25,5 2,5       L-Ag45Sn AG 104
Ag55Sn 55 21 22 2       L-Ag55Sn AG 103
Ag56Sn 56 22 17 5       L-Ag55Sn AG 102
Ag60Sn 60 23 14 3       L-Ag60Sn AG 101
Ag30Cd 30 28 21   21     L-Ag30Cd AG 306 Alloys with Cadmium
Ag40Cd 40 19 21   20     L-Ag40Cd AG 304
Ag40Ni/1 40 58       2       Suitable for brazing in oven
Ag49MnNi 49 16 23     4,5 Mn7,5 L-Ag49 AG 502 For Hard Metal
Ag49MnNi/1 TR 49 27,5 20,5     0,5 Mn2,5 Trimetal Strip.For Hard Metal brazing, medium/large carbide tips.
Ag60Sn/1 60 30   10         AG 402 Suitable for brazing in oven
Ag72 72 28             AG 401
FLUXES
FLUX AG1 General Purpose
FLUX AG4 General Purpose – Very wide range of temperature
FLUX AG7 General Purpose. Also for Stainless Steel.
FLUX AG8 For Stainless Steel and Hard Metal
COPPER-PHOSPHOROUS ALLOYS
Code Composition % Melting Range SOL — LIQ Standard Notes
Ag Cu P Sn °C DIN 8513 EN 1044
CuP7Sn   86 7 7 650-700   CP 302 Copper-copper and copper-brass joints. For joining copper to copper no flux is necessary. CuP7Sn is also available as flux-coated rod.
Ag2CuP 2 91,5 6,5   650-810 L-Ag2P CP 105
Ag5CuP 5 89 6   650-810 L-Ag5P CP 104
Ag15CuP 15 80 5   650-800 L-Ag15P CP 102
Cu99,9   99,9     1083   CU 101 Copper Paste for brazing in oven.
FLUXES
FLUX AG4 For Copper-Brass joints.